Interchangeable insert moulds are injection moulding tools designed with replaceable cavity, core, or other mould inserts that can be removed and exchanged without replacing the complete mould. This modular approach allows a single mould base to be used for producing different components, product variants, or design configurations. The interchangeable inserts are accurately located and secured […]
Interchangeable Insert Moulds Read More »
Parting line design is an important aspect of thermoforming mould development that determines the location where the mould separates to release the formed plastic component. The parting line is the boundary between the mating sections of a mould, typically the upper and lower mould halves. Proper parting line placement helps ensure easy demoulding, accurate component
Parting Line Design for Thermoforming Read More »
Positive compression moulds are a type of compression moulding tool designed with a closely fitting punch and cavity to produce components with precise dimensions, controlled material thickness, and minimal flash. In this moulding process, a measured quantity of moulding material is placed into the mould cavity, and the punch applies direct compression to force the
Positive Compression Moulds Read More »
Family injection moulds are specialized injection moulding tools designed to produce multiple different plastic components within a single mould during one injection cycle. Unlike conventional multi-cavity moulds, which produce identical components in every cavity, family moulds contain cavities of different shapes and sizes to manufacture related components simultaneously. In a family injection mould, multiple cavities
Family Injection Moulds Read More »
Draft angles in thermoforming moulds are the slight tapers incorporated into the vertical walls and surfaces of a mould to facilitate the easy removal of thermoformed plastic components without causing deformation, surface damage, or excessive friction. These angles are an essential part of mould design, as they help ensure smooth demoulding, maintain dimensional accuracy, and
Draft Angles in Thermoforming Moulds Read More »
Flash-type compression moulds are a conventional type of compression moulding tool designed to manufacture plastic, rubber, and thermoset components by applying heat and pressure to a measured quantity of material inside a mould cavity. In this moulding process, a controlled amount of excess material is allowed to flow out through the clearance between the mould
Flash-Type Compression Moulds Read More »
Stack moulds are advanced injection moulding systems designed to increase production capacity by incorporating two or more parting lines and sets of mould cavities within a single mould assembly. This configuration allows multiple layers of components to be produced during a single injection cycle, significantly increasing output without requiring a larger injection moulding machine. In
