September 2026

A compression mould is a tooling system used to shape materials by placing a measured charge into a mould cavity and applying heat and pressure. Compression moulds are commonly used for thermoset plastics, rubber, silicone, composites, and other moulding materials. A typical compression mould consists of several components that work together to form, cure, cool, […]

A Cold Runner Injection Mould is an injection moulding system in which the runner channels are kept at a relatively low temperature. The molten plastic passes through the sprue and runners before entering the mould cavity, and the runner material solidifies along with the moulded part. Cold runner moulds are widely used because they are

A Hot Runner Injection Mould is an injection moulding system in which the molten plastic is kept hot inside the mould’s runner system. Unlike a conventional cold runner mould, the material does not solidify inside the runners after every injection cycle. Hot runner systems are widely used for high-volume plastic production, especially when fast cycle

Compression mould design involves designing a mould that can safely and efficiently shape a material under heat and pressure. Compression moulding is commonly used for thermosetting plastics, rubber, silicone, composite materials, and certain thermoplastics. A good mould design should provide accurate dimensions, uniform material flow, effective heating, easy part removal, and consistent production. 1. Basic

Multi-Cavity Thermoforming Moulds are moulds designed to produce multiple identical or different thermoformed parts during a single forming cycle. Instead of forming one product at a time, several cavities are arranged on one mould or tooling plate. They are especially useful for medium- to high-volume production, where increasing the number of parts produced per cycle

A Three-Plate Injection Mould is an injection mould design that uses three main plate sections and typically has two parting planes. This construction provides greater flexibility in gate placement and allows the runner system to separate from the moulded component during mould opening. Three-plate moulds are commonly used when a conventional two-plate mould cannot provide

A Single-Cavity Thermoforming Mould is a mould designed to produce one thermoformed component during each forming cycle. It is commonly used for prototypes, customized products, low-volume production, and products that are too large or complex for multi-cavity tooling. In thermoforming, a thermoplastic sheet is heated until it becomes flexible and then formed over or into

Silicone Compression Moulding is a manufacturing process used to produce silicone rubber components by placing a measured quantity of silicone material into a mould cavity and applying heat and pressure until the material cures and takes the required shape. It is widely used for products requiring flexibility, temperature resistance, chemical resistance, and good sealing properties.

Male and female thermoforming moulds are two basic types of moulds used to shape heated thermoplastic sheets into different products. The main difference is the direction in which the plastic sheet is formed. Both types are widely used in plastic packaging, automotive parts, appliance components, trays, containers, and industrial products. 1. Male Thermoforming Mould A

Rubber Compression Moulding is a manufacturing process used to produce rubber components by placing a measured quantity of rubber compound into a heated mould and applying pressure until the material takes the shape of the mould and cures. It is widely used for manufacturing seals, gaskets, O-rings, rubber pads, bushings, diaphragms, and other flexible components.